Description
Bolt Heater is designed primarily to pre-heat large, drill holding bolts or studs. The Bolt Heater is used in the assembly or servicing of hydraulic presses, turbines or other equipment where a high concentration of heat is needed to expand, then wrench tighten tie rods. The parts cool and contract, resulting in the nut being drawn even tighter. A terminal box of octagon or circular shaped is fixed on the top where the terminals are provided and an insulated wooden handle is provided for shoving the heater inside/ outside the tunnel.
We manufacture Bolt Heaters in the form of Split Sheathed Heater complete with Terminal Box & holding and an insulated wooden handle.
Applications
Power Plants
Shipyard
Press & Die Manufacturer
| APPLICATION & TECHNICAL DATA TO BOLT HEATER SPECIFICATION | ||||||||||
| Diameter +/- 0.12 7min | 11.7 | 12.6 | 14.04 | 14.73 | 15.77 | 17.47 | 18.03 | 18.94 | 20.65 | 25-29 |
| Volts | 240 | 240 | 240 | 480 | 480 | 480 | 480 | 480 | 480 | 4S0 |
| Amps | 9.7 | 9.7 | 14 | 23 | 23 | 23 | 46 | 46 | 46 | 46 |
| Watt at 120 V | 1160 | 1160 | 1680 | 2760 | 2760 | 2 760 | 5520 | 5520 | 5520 | 5520 |
| Watt at 240 V | 2320 | 2320 | 3360 | 5520 | 5520 | 5520 | 11040 | 11040 | 11040 | 11040 |
Ordering Information :
• Diameter • Overall Length
• Watts
• Volts
• Heating Length
• Terminal Configuration
• Quantity
