Product List
Categories
- Standard Heaters
- Standard HEATCO make Air And Finned Air Heaters
- Standard HEATCO make Replaceable Cartridge Immersion Heaters
- Standard HEATCO make Refractory Charged Air And Finned Heaters
- Standard HEATCO make Alkaline And Lead Covered And Chemical Immersion Heaters
- Standard HEATCO make Industrial Water Immersion Heaters
- High Density Cartridge Heaters
- ESP Hopper Heater & Shaft Insulator Heaters
- Oil Immersion Heaters
- Custom Built Heaters
- Electrical Heat Chambers And Oven
- Industrial Heater Products
- Flanged Immersion Heater
- Air Duct Heaters
- Compressor Heaters
- U Type Tubular Electrical Heaters
- ESP And Buffer Hopper Fluidization Heater
- U type Heating Element with Clamps.
- Heaters For Dehydration Unit
- Support Insulator Heaters
- Laddle & Pot Heaters
- High and Low Density Cartridge Heaters
- Open Coil Elements
- Line Heaters
- Process Heaters
- Shaft Insulator Heater
- Storage Tank Heater
- Type of Electrical Heaters
- Air Heater for AHU
- Thermocouple And Sensors
- Heater Control Panel
Bolt Heater is designed primarily to pre-heat large, drill holding bolts or studs. The Bolt Heater is used in the assembly or servicing of hydraulic presses, turbines or other equipment where a high concentration of heat is needed to expand, then wrench tighten tie rods. The parts cool and contract, resulting in the nut being drawn even tighter. A terminal box of octagon or circular shaped is fixed on the top where the terminals are provided and an insulated wooden handle is provided for shoving the heater inside/ outside the tunnel.
We manufacture Bolt Heaters in the form of Split Sheathed Heater complete with Terminal Box & holding and an insulated wooden handle.
Applications
Power Plants
Shipyard
Press & Die Manufacturer
|
APPLICATION & TECHNICAL DATA TO BOLT HEATER SPECIFICATION |
||||||||||
|
Diameter +/- 0.12 7min |
11.7 |
12.6 |
14.04 |
14.73 |
15.77 |
17.47 |
18.03 |
18.94 |
20.65 |
25-29 |
|
Volts |
240 |
240 |
240 |
480 |
480 |
480 |
480 |
480 |
480 |
4S0 |
|
Amps |
9.7 |
9.7 |
14 |
23 |
23 |
23 |
46 |
46 |
46 |
46 |
|
Watt at 120 V |
1160 |
1160 |
1680 |
2760 |
2760 |
2 760 |
5520 |
5520 |
5520 |
5520 |
|
Watt at 240 V |
2320 |
2320 |
3360 |
5520 |
5520 |
5520 |
11040 |
11040 |
11040 |
11040 |
Ordering Information :
• Diameter • Overall Length
• Watts
• Volts
• Heating Length
• Terminal Configuration
• Quantity
